Article Updated: February 17, 2026

Most pavers in Florida need resealing every 2 to 3 years, but many homeowners wait too long. In humid areas like Port St. Lucie and throughout the Treasure Coast, sun exposure, irrigation, and heavy rain accelerate wear. Knowing the early signs of resealing can help you avoid fading, staining, and costly repairs.

So how do you know when it’s time?

Here are the top 3 signs your pavers need resealing and why acting early can save you big time.

1. Color Fading or Dull Appearance

When pavers begin losing their rich color or start looking chalky, it usually means the protective layer has worn down. Florida’s intense UV exposure breaks down sealers over time, especially on driveways and pool decks with full sun exposure. If water no longer beads on the surface, your sealer is likely failing. Read more on how long paver sealer lasts in Florida.

What’s happening:

Florida’s UV rays break down sealer over time. Once that protective layer is gone, the color starts to fade unevenly. If left untreated, the damage becomes permanent.

Quick Test:

Compare a shaded area to one in full sun. If the color is drastically different or if water no longer beads up it’s time to reseal.

This is one of the most common signs pavers need resealing especially in open driveways or pool decks across Port St. Lucie, Jensen Beach, and Jupiter.

2. Moisture Soaks In Instead of Beading

A freshly sealed surface will repel water like a raincoat. But as that protection wears off, your pavers go back to acting like sponges soaking up everything from rainwater to oil spills.

What to look for:

  • Water quickly darkens the surface
  • Puddles sink into joints or seams
  • Stains appear and don’t wash away easily

In communities like Tradition, Riverland, or Telaro, where irrigation is constant and rain rolls in daily during the summer, this leads to:

  • Algae and mold growth
  • Joint sand erosion
  • Surface deterioration

Tip: Hose down your pavers. If the water doesn’t bead you need a reseal.

3. Joint Sand Washing Out

Heavy rain and irrigation systems common in communities like Tradition, PGA Verano, and Telaro can slowly erode joint sand. When sand disappears, pavers can shift, ants can tunnel, and weeds can grow. Resealing locks joint sand in place and helps maintain structural stability.

Over time, UV rays and rain slowly break down that sand, especially if the sealer has worn away. What happens next?

  • Ants tunnel in
  • Weeds push up
  • Sand washes out
  • Pavers begin shifting or sinking

If you’re constantly pulling weeds or spotting ants around your pavers, the protective seal is probably long gone.

This is especially common in driveways and pool decks in Bedford Park, Town Park, and other Port St. Lucie neighborhoods with mature landscaping. A common question at this point. is: Do I need to pressure wash before sealing pavers?

What Happens If You Ignore These Signs?

Waiting too long between reseals can lead to:

  • Deep stains that can’t be cleaned
  • Structural shifting that requires expensive repairs
  • Permanent fading that sealer can’t reverse
  • Mold buildup and safety hazards

The cost to reseal is nothing compared to the cost of ripping out and replacing damaged pavers.

How Often Do Pavers Need Resealing in Port St. Lucie?

In Port St. Lucie neighborhoods such as Del Webb, Heron Preserve, PGA Verano, and Ditalia, irrigation overspray and frequent rainfall accelerate wear. Most homeowners should expect to reseal pavers every 2 to 3 years to maintain appearance and protection. If you’re noticing fading color, sand loss, or stubborn stains, it may be time to take action. Professional paver sealing Port St Lucie homeowners trust can restore color, protect against Florida’s harsh climate, and help your investment last longer.

Paver Resealing FAQs

Bonus Tip: How Often Should You Reseal?

In Florida, we recommend resealing every 2 to 3 years, depending on:

  • Sun exposure
  • Irrigation patterns
  • Foot/vehicle traffic
  • Sealer type used

Homeowners often ask us, “Can I just wait until they look bad?”
Our answer: you can, but it’ll cost more to fix than to prevent. Check out this article: What happens if you never seal your pavers?

What We Do at A Buff & Beyond

We handle the entire resealing process with Florida’s climate in mind:

  • Surface inspection and pressure cleaning
  • Eco-friendly pre-treatment
  • Joint sand replacement (if needed)
  • Professional-grade sealer application
  • Final walkthrough for quality and finish

We’ve successfully sealed and resealed pavers throughout the Treasure Coast in areas such as Port St. Lucie, Stuart, Jupiter, Palm City, Jensen Beach and beyond with results that look amazing and last a long time. Want to know what paver sealing costs? Check out this article.